Direct tuning

Enter the frequency of a station directly by using the numeric buttons.

4 Press the numeric buttons to enter the frequency, then press to enter.

Example 1: FM 102.50 MHz

Select 1 b 0 b 2 b 5

Example 2: AM 1,350 kHz

Select 1 b 3 b 5 b 0

1

4

2-4

1 Make sure that the AMP button is lit.

If it is not lit, or “GUI MODE” is not displayed in the display window of the receiver, follow the steps given in “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38).

2 Press V/v repeatedly to select “FM” or “AM,” then press or b.

3 Press V/v to select “Direct

Tuning,” then press .

Tip

If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception.

If you cannot tune in a station

“– – – .– – MHz” appears and then the display returns to the current frequency.

Make sure you have entered the right frequency. If not, repeat step 4. If you still cannot tune in a station, the frequency is not used in your area.

80GB