
1Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR on the receiver.
2Press TUNING + or TUNING
Press TUNING + to scan from low to high frequencies, press TUNING – to scan from high to low frequencies. The receiver stops scanning whenever a station is received.
You can also press TUNING MODE on the receiver to select “AUTO,” and then turn TUNING to select stations.
Selecting a frequency directly (Direct Tuning)1After selecting the FM or AM band, press D.TUNING.
2Press the numeric buttons to enter the frequencies, then press to enter.
Presetting radio stations
1 Tune in the station that you want to preset.
For details on the operation, refer to “Tuning radio stations.”
2 Press MEMORY.
“MEMORY” appears on the display for a few seconds. Perform steps 3 and 4 before the display changes.
3 Press PRESET + or PRESET – to select a preset number.
30 FM and 30 AM preset numbers are available. If “MEMORY” disappears before you select the preset number, start again from step 2.
4 Press ENTER.
The station is stored as the selected preset number. If “MEMORY” disappears
112GB