Symptom

Cause/Action

 

 

 

The input sound is distorted.

The microphone volume is too high.

 

Action 1

 

 

Right-click the

icon on the taskbar, and select the recording

 

device.

 

From the displayed recording device, select “Microphone C-Media…,” and click “Properties.” “Microphone Properties” screen appears. Select the “Levels” tab and set the microphone volume according to your microphone.

Action 2

Right-click the icon on the taskbar, and select the recording device.

From the displayed recording device, select “Microphone C-Media…,” and click “Properties.” “Microphone Properties” screen appears. Select the custom tab and turn AGC (Automatic Gain Control) to off.

External Display

Symptom

Cause/Action

 

 

 

Nothing appears on the

Disconnect the product from the personal computer or disconnect the

display, or images are

 

display from the product, wait for a few seconds, then reconnect. See

displayed abnormally.

 

“Disconnecting the product” (page 7). “Connecting to the personal

 

 

computer” (page 6).

 

The setup program did not finish.

 

 

Install the driver from the installation CD.

 

The DVI-D connector and MONITOR connector cannot be used

 

 

simultaneously.

 

 

Connect the display to either the DVI-D or MONITOR connector.

 

Images are not displayed in the specified resolution.

 

 

The maximum resolution for the product is 1680 × 1050 pixels.

 

 

Resolution higher than 1680 × 1050 pixels will not be displayed.

 

There are conditions required by the software.

 

 

This product does not meet the conditions required for 3D games. If

 

 

software such as 3D games is activated with this product connected,

 

 

the output from the product or the display of the personal computer

 

 

will not be stable. Disconnect the product then use the software.

 

The product does not support Windows Aero. If the product is

 

 

connected to a personal computer, it will change to the basic user

 

 

interface.

The personal computer screen does not appear on the display (clone (mirror) mode).

The display output of this product functions only in the extended desktop mode. For using clone mode (mirror mode), use the external display output of the personal computer.

The images of the extended desktop do not display.

The output setting is set to “Off.” Right-click the icon on the taskbar, to display the menu. Select “Extend” from the menu.

20 GB