Southbend SB1001 owner manual Carriage Tailstock, Carriage components

Model SB1001 8K™ Lathe	I N T R O D U C T I O N	For Machines Mfg. Since 8/11
Carriage	Tailstock

E

F

G

K

J H

I

Figure 3. Carriage components.

L N

O

M

P

Q

Figure 4. Tailstock components.

E.4-Way Tool Post: Mounts up to four cutting tools at once that can be individually indexed to the workpiece.

F.Compound Rest Ball Handle: Moves the tool toward and away from the workpiece at the preset angle of the compound rest.

G.Carriage Lock: Secures the carriage in place when the carriage should not move.

H.Thread Dial and Chart: Dial indicates when to engage the half nut during threading operations. Chart indicates on which thread dial reading to engage the half nut for specific inch thread pitches.

I.Half Nut Lever: Engages/disengages the half nut for threading operations.

J.Carriage Handwheel: Moves the carriage along the bedway.

K.Cross Slide Ball Handle: Moves the cross slide toward and away from the workpiece.

L.Quill: Moves a tool or center toward or away from the workpiece.

M.Tailstock Lock Nut: Secures the tailstock in position along the bedway.

N.Quill Lock Lever: Secures the quill in position.

O.Quill Ball Handle: Controls the movement of the quill.

P.Offset Scale: Indicates the relative distance of tailstock offset from the spindle centerline.

Q . Tailstock Offset Set Screw (1 of 2): Adjusts the tailstock offset left or right from the spindle centerline.

-6-