For Machines Mfg. Since 8/11 | P R E P A R A T I O N |
Model SB1001 8K™ Lathe
Preparation Overview
The purpose of the preparation section is to help you prepare your machine for operation. The list below outlines this basic process. Specific steps for each of these points will be covered in detail later in this section.
The typical preparation process is as follows:
1.Unpack the lathe and inventory the contents of the box/crate.
2.Clean the lathe and its components.
3.Identify an acceptable location for the lathe and move it to that location.
4.Level the lathe and bolt it to a workbench or stand.
5.Assemble the loose components and make any necessary adjustments or inspections to ensure the lathe is ready for operation.
6.Check/lubricate the lathe.
7.Connect the lathe to the power source.
8.Test run the lathe to make sure it functions properly.
9.Perform the spindle
Required for Setup
To complete the preparation process, you will need the following items:
For Lifting and Moving
ss!DDITIONAL PEOPLEAFOR LIFTINGPTHEELATHEOAT least two)
For Power Connection
ss!!POWEROSOURCE THATOMEETSCTHE MINIMUMT circuit requirements for this machine (review Power Supply Requirements on the next page for details)
For Cleaning & Assembly
ssCotton rags
ssMineral spirits
ssQuality metal protectant oil ss 3AFETY glasses
ss Bench mounting hardware as needed ss 0RECISIONILEVEL
