![](/images/new-backgrounds/1314450/31445041x1.webp)
For Machines Mfg. Since 8/09 | O P E R A T I O N | Model SB1017 |
OperationPERATIONOverview
The purpose of this overview is to provide the novice machine operator with a basic understanding of how the machine is used during operation, so they can more easily understand the controls discussed later in this manual.
Note: Due to the generic nature of this overview, it is not intended to be an instructional guide for performing actual machine operations.
To learn more about specific operations and machining techniques, seek training from people experienced with this type of machine, and do additional research outside of this manual by reading
To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Loose hair, clothing, or jewelry could get caught in machinery and cause serious personal injury. Keep these items away from moving parts at all times to reduce this risk.
During operation, small metal chips may become airborne, leading to serious eye injury. Wear safety glasses to reduce this risk.
To complete a typical operation, the operator does the following:
1.Examines the workpiece to make sure it is suitable for cutting.
2.Checks/adjusts the
3.Raises the head, then closes the downfeed valve.
4.Adjusts the vise angle for the operation, then securely clamps the workpiece in the vise.
5.Lowers the saw bow close to the workpiece, then adjusts the guide post to within 1" of the workpiece, and verifies that the blade is properly tensioned.
6.Adjusts the guide post so the opening between the two blade guides is approximately 1⁄4" larger than the width of the workpiece.
7.Makes sure the workpiece and bandsaw are stable and that there are no obstructions in the way of the cut.
8.Puts on safety glasses.
9.Starts the bandsaw and waits for the blade to reach full speed.
10.Opens the downfeed valve to lower the head and blade into the workpiece, then allows the bandsaw to complete the cut.
11.Once the bandsaw has stopped, raises the head, and removes the workpieces.