Southbend sb1039 Accessories, SB1279-10 Pc. Precision 5-C Collet Set, SB1264-Collect Attachment

For Machines Mfg. Since 5/11 A C C E S S O R I E S 14" TURN-X®Toolroom Lathe

Accessories

This section includes the most common accessories available for your lathe, which may be available through your local South Bend Lathe Co. dealer. If you do not have a dealer in your area, please call us at (360) 734-1540 or email us at cs@southbendlathe.com.

SB1279—10 Pc. Precision 5–C Collet Set

Set of 10 collets sized from 1⁄8" - 3⁄4". Same quality as the individual collets, only packaged in one convenient set.

D1-5 Back Plates

SB1397—6⁜1⁄4"

SB1399—8⁜1⁄4"

SB1401—10⁜1⁄2"

Sized to fit D1-5 chuck mounts, these back plates are precision made and mount to your chuck with minimal modifications.

Figure 90. Model SB1279 10 Pc. 5-C Collet Set.

SB1264—Collect Attachment

This collet attachment takes advantage of the South Bend factory-made collet port in the lathe gear cover. This accessory installs easily on these South Bend Lathes without having

to modify the gear cover. The Model SB1264 is capable of delivering years of trouble-free service. It is manufactured with the same high-quality workmanship, materials, and tolerances South Bend machinery is known for.

Figure 92. D1-5 Back Plate.

SB1263—Taper Attachment

This taper attachment mounts quickly to the back bedway of your lathe. Accurate tapers of up to 12" can be produced without repositioning the attachment, having to offset the tailstock, or disengaging the cross slide nut. The Model SB1263 features scales at both ends, reading inches-per-foot and degrees. An angle adjusting knob with fine threads achieves exacting control when setting tapers.

Figure 91. Model SB1264 Collect Attachment.

Figure 93. Model SB1263 Taper Attachment.

-61-