
14" | O P E R A T I O N | For Machines Mfg. Since 5/11 |
|
|
|
If the spindle is rotating when attempting to change the configuration of the headstock feed controls, the gears in the headstock and
Power Feed Controls
Use Figures
Note: Before using power feed, you may have to
| A |
B | C |
D |
|
Figure 70. Power feed controls on the headstock.
A.Feed Range Lever: Selects the low or high feed rate range by
B.Feed Direction Lever: When the lathe is stopped, selects the direction for power feed.
Note: When the lathe is running, use the quick- change feed direction knob on the apron.
C.Feed Rate Chart: Displays the settings for the headstock and
D.Quick-change Gearbox Feed Levers:
Configure the
—Left Lever Positions:
—Middle Lever Positions:
—Right Lever Positions:
—Bottom Lever Positions:
Even though there is a