For Machines Mfg. Since 5/11 | P R E P A R A T I O N | 14" |
|
|
|
Unpacking
This item was carefully packaged to prevent damage during transport. If you discover any damage, please immediately call Customer Service at (360)
Inventory |
| |
Main Inventory 1: (Figure 11) | Qty | |
A. | Steady Rest Assembly (Installed) | 1 |
B. | 10" Faceplate | 1 |
C. | 10" | |
D. | 1 | |
E. | 1 | |
F. | Follow Rest Assembly (Installed) | 1 |
Tool Box Inventory: (Figure 12) | Qty | |
G. | Tool Box | 1 |
H. | Open End Wrench 22/24mm | 1 |
I. | Open End Wrench 14/17mm | 1 |
J. | Open End Wrench 10/12mm | 1 |
K. | Phillips Screwdriver #2 | 1 |
L. | Standard Screwdriver #2 | 1 |
M. | Hex Wrench 8mm | 1 |
N. | Tapered Spindle Sleeve | 1 |
O. | Dead Center MT#3 | 1 |
P. | 1 | |
Q. | Camlock Key | 1 |
R.Tool Post
S. | Hex Wrench Set | 1 |
T. | Carriage Handwheel Handle | 1 |
U. | Cross Slide Handwheel Handle | 1 |
V. | Cast Iron Leveling Pads | 6 |
| Qty | |
• | 8" | 1 |
• | 8⁜1⁄4" Back Plate | 1 |
Note: Some inventory components may be shipped inside of the lathe electrical box. These items MUST be removed before connecting the lathe to the power source.
AB
DC
F
E
Figure 11. Main inventory.
GH I
K
N J L
O P M
Q T
U
RV S
Figure 12. Toolbox inventory.
If you cannot find an item on this list, check the mounting location on the machine or the packaging materials. Sometimes parts are
