Southbend SB1052F TURN-X owner manual Follow Rest, Carriage & Slide Locks

For Machines Mfg. Since 5/11 O P E R A T I O N 14" TURN-X®Toolroom Lathe

Follow Rest

The follow rest mounts to the saddle with two cap screws (see Figure 56). It is used on long, slender parts to prevent workpiece deflection from the pressure of the cutting tool during operation. Adjust the follow rest fingers in the same manner as the those on the steady rest.

Note: To reduce the effects of friction, lubricate the brass finger tips with generous lubricant during operation.

Cap

Screws

Figure 56. Follow rest attachment.

Carriage & Slide Locks

The carriage, cross slide, and compound rest have locks that can be tightened to provide additional rigidity during operation, especially during heavy cuts.

See Figures 57–58to identify the locations of the locks for each device.

Cross Slide	Carriage
Lock	Lock

Figure 57. Location of carriage and cross slide locks.

Compound Rest

Lock

Figure 58. Location of compound rest lock.

-45-