For Machines Mfg. Since 5/11 | M A I N T E N A N C E | 14" |
|
|
|
Quick-Change Gearbox
Oil Type....... Mobil Vactra 2 or ISO 68 Equivalent
Oil Amount | 1Quart |
Check/Add Frequency | Daily |
Change Frequency | Annually |
Checking Oil Level
The gearbox reservoir has the proper amount of oil when the oil level in the sight glass is approximately halfway. The oil sight glass is located on the right side of the gearbox, as shown in Figure 102.
Gearbox Oil
Sight Glass
Figure 102. Location of quick-change gearbox oil sight
glass.
Adding Oil
Use a 5⁄8" wrench to remove the gearbox fill plug (see Figure 103), then add the oil until the level is approximately halfway in the gearbox oil sight glass.
Fill
Plug
Drain
Plug 
Figure 103. Locations of the quick-change gearbox fill
and drain plugs.
Draining Oil
Place a catch pan under the
Apron
Oil Type | Mobil Vactra 2 or ISO 68 Equivalent | |
Oil Amount | 1.2 Quarts | |
Check/Add Frequency | ..................................... Daily | |
Change Frequency | Annually | |
Checking Oil Level
The apron oil sight glass is on the front of the apron, as shown in Figure 104. Maintain the oil volume so that the level is approximately halfway in the sight glass.
Sight
Glass
Figure 104. Location of apron oil sight glass.
Draining Oil & Flushing Reservoir
Since the apron oil reservoir supplies the one- shot oiler, the oil is constantly being refreshed when the reservoir is filled. However, small metal particles may accumulate at the bottom of the reservoir with normal use. Therefore, to keep the reservoir clean, drain and flush it at least once a year.
