16-Speed Gearhead Lathe

P R E P A R A T I O N

For Machines Mfg. Since 3/11

Power Supply

Requirements

Availability

Before installing the machine, consider the availability and proximity of the required power supply circuit. If an existing circuit does not meet the requirements for this machine, a new circuit must be installed.

To minimize the risk of electrocution, fire, or equipment damage, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards.

Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this manual.

Full-Load Current Rating

The full-load current rating is the amperage a machine draws at 100% of the rated output power. On machines with multiple motors, this is the amperage drawn by the largest motor or sum of all motors and electrical devices that might operate at one time during normal operations.

SB1053 Full-Load Rating

20.3 Amps

SB1054F Full-Load Rating

10.15 Amps

SB1055F Full-Load Rating

10.23 Amps

The full-load current is not the maximum amount of amps that the machine will draw. If the machine is overloaded, it will draw additional amps beyond the full-load rating.

If the machine is overloaded for a sufficient length of time, damage, overheating, or fire may result—especially if connected to an undersized circuit. To reduce the risk of these hazards, avoid overloading the machine during operation and make sure it is connected to a power supply circuit that meets the requirements in the following section.

Circuit Requirements

Model SB1053

This machine is prewired to operate on a 220V power supply circuit that has a verified ground and meets the following requirements:

Nominal Voltage

220V/230V

Cycle

60 Hz

Phase

3-Phase

Circuit Rating

30 Amps

Plug/Receptacle Type

NEMA L15-30

Cord

"S"-Type, 4-Wire, 10 AWG, 300 VAC

Model SB1054F & SB1055F

These machines are prewired to operate on a 440V power supply circuit that has a verified ground and meets the following requirements:

Nominal Voltage

440V/480V

Cycle

60 Hz

Phase

3-Phase

Circuit Rating

15 Amps

Connection .. Hardwire with Locking Switch

A power supply circuit includes all electrical equipment between the main breaker box or fuse panel in your building and the incoming power connections inside the machine. This circuit must be safely sized to handle the full-load current that may be drawn from the machine for an extended period of time.

For your own safety and protection of property, consult a qualified electrician if you are unsure about wiring practices or electrical codes in your area.

Note: The circuit requirements listed in this manual apply to a dedicated circuit—where only one machine will be running at a time. If this machine will be connected to a shared circuit where multiple machines will be running at the same time, consult a qualified electrician to ensure that the circuit is properly sized for safe operation.

-18-

Page 24
Image 24
Southbend SB1053F Turn-X Power Supply Requirements, Availability, Full-Load Current Rating, Circuit Requirements

SB1053F Turn-X specifications

The Southbend SB1053F Turn-X is a state-of-the-art oven designed to meet the high demands of commercial kitchens. Renowned for its reliability and efficiency, the Turn-X model stands out with an array of features that cater to the diverse needs of restaurants, catering services, and food production facilities.

One of the key characteristics of the SB1053F is its innovative forced-air convection system. This technology ensures that heat is evenly distributed throughout the cooking chamber, resulting in perfectly cooked food every time. The uniform airflow helps to achieve consistent cooking results, reducing the risk of hot spots and unevenly cooked dishes, which is crucial for professional chefs aiming for culinary perfection.

The Turn-X oven is equipped with a user-friendly digital control panel that allows chefs to easily program and monitor cooking times and temperatures. This feature enhances the ease of use, enabling kitchen staff to multi-task efficiently without compromising on the quality of the dishes being prepared. With pre-set cooking options, the oven can accommodate a wide range of recipes, from baking to roasting.

Another notable feature of the SB1053F is its robust construction. Built with high-quality stainless steel, the oven is designed to withstand the rigors of a busy kitchen environment. The durable exterior not only provides an appealing aesthetic but also ensures easy cleaning and maintenance, a vital aspect for maintaining hygiene in food service operations.

The Turn-X also incorporates energy-efficient technologies, providing significant cost savings. Its advanced insulation minimizes heat loss, allowing the oven to reach and maintain optimal cooking temperatures quickly while using less energy. This feature is particularly beneficial for establishments aiming to reduce their environmental footprint while controlling operational costs.

The spacious cooking chamber accommodates multiple racks, maximally utilizing the available space. This design allows for high-volume cooking, ideal for restaurants with heavy demand during peak hours. The oven’s versatility makes it suitable for various cooking styles, including baking pizzas, roasting meats, and even dehydrating fruits or vegetables.

In conclusion, the Southbend SB1053F Turn-X oven combines advanced convection technology, user-friendly controls, robust construction, and energy efficiency to create a kitchen appliance that meets the needs of today's fast-paced culinary environments. Its reliability and innovative features make it a valuable asset for any professional kitchen seeking to enhance productivity while delivering consistently high-quality food.