16-Speed Gearhead Lathe

P R E P A R A T I O N

For Machines Mfg. Since 3/11

In addition to the reservoirs, we also recommend that you lubricate all other points on the machine at this time. This can be accomplished by following the maintenance schedule on Page 65.

Note: If this lathe was shipped with oil in the reservoirs, do not change that oil until after the test run and break-in procedures.

Adding Coolant

Add the coolant of your choice now. For detailed instructions on where the coolant tank is located and how to add fluid, refer to Coolant System Service subsection on Page 72.

Power Connection

After you have completed all previous setup instructions and circuit requirements, the machine is ready to be connected to the power supply.

Model SB1053

Connect a power cord that meets the Circuit Requirements on Page 18, as instructed later in this subsection. Attach a locking NEMA L15- 30 plug as directed by the plug manufacture, and insert it into a matching receptacle

that is connected to a circuit that meets the requirements listed on Page 18.

Model SB1054F & SB1055F

Due to the complexity required for planning, bending, and installing the conduit necessary for a code-compliant hardwire setup, an electrician or other qualified person MUST perform this type of installation.

Hardwire setups typically require power supply wires to be enclosed inside of a solid or flexible conduit, which is securely mounted at both ends with the appropriate conduit fittings. All work must adhere to the required electrical codes.

The hardwire setup must include a locking disconnect switch (see Figure 25) between the power source and the machine. This switch serves as the means to completely disconnect the machine from power to prevent electrocution from accidental startup during adjustments, maintenance, or service to the machine.

 

 

Locking

 

Power Source

Disconnect Switch

Machine

Conduit

Conduit

 

Figure 25. Typical hardwire setup with a locking

disconnect switch.

When removing the plug from the receptacle, grasp it and pull it completely out of the receptacle. Do not pull by the cord as this may damage the wires inside.

-26-

Page 32
Image 32
Southbend SB1053F Turn-X owner manual Adding Coolant, Power Connection

SB1053F Turn-X specifications

The Southbend SB1053F Turn-X is a state-of-the-art oven designed to meet the high demands of commercial kitchens. Renowned for its reliability and efficiency, the Turn-X model stands out with an array of features that cater to the diverse needs of restaurants, catering services, and food production facilities.

One of the key characteristics of the SB1053F is its innovative forced-air convection system. This technology ensures that heat is evenly distributed throughout the cooking chamber, resulting in perfectly cooked food every time. The uniform airflow helps to achieve consistent cooking results, reducing the risk of hot spots and unevenly cooked dishes, which is crucial for professional chefs aiming for culinary perfection.

The Turn-X oven is equipped with a user-friendly digital control panel that allows chefs to easily program and monitor cooking times and temperatures. This feature enhances the ease of use, enabling kitchen staff to multi-task efficiently without compromising on the quality of the dishes being prepared. With pre-set cooking options, the oven can accommodate a wide range of recipes, from baking to roasting.

Another notable feature of the SB1053F is its robust construction. Built with high-quality stainless steel, the oven is designed to withstand the rigors of a busy kitchen environment. The durable exterior not only provides an appealing aesthetic but also ensures easy cleaning and maintenance, a vital aspect for maintaining hygiene in food service operations.

The Turn-X also incorporates energy-efficient technologies, providing significant cost savings. Its advanced insulation minimizes heat loss, allowing the oven to reach and maintain optimal cooking temperatures quickly while using less energy. This feature is particularly beneficial for establishments aiming to reduce their environmental footprint while controlling operational costs.

The spacious cooking chamber accommodates multiple racks, maximally utilizing the available space. This design allows for high-volume cooking, ideal for restaurants with heavy demand during peak hours. The oven’s versatility makes it suitable for various cooking styles, including baking pizzas, roasting meats, and even dehydrating fruits or vegetables.

In conclusion, the Southbend SB1053F Turn-X oven combines advanced convection technology, user-friendly controls, robust construction, and energy efficiency to create a kitchen appliance that meets the needs of today's fast-paced culinary environments. Its reliability and innovative features make it a valuable asset for any professional kitchen seeking to enhance productivity while delivering consistently high-quality food.