16-Speed Gearhead Lathe

P R E P A R A T I O N

For Machines Mfg. Since 3/11

12.Connect the lathe to the power source, then turn the master power switch to the ON position (see Figure 34).

Master

Power Switch

Figure 34. Master power switch turned ON.

13.To reset the STOP button and enable power to the lathe electrical controls, twist the STOP button clockwise until it pops out. The power light on the control panel should illuminate (see Figure 29 on Page 28).

14.Verify that the machine is operating correctly by moving the spindle ON/OFF lever out and down to start spindle rotation (see Figure 35).

Spindle

Lever

Figure 35. Spindle ON/OFF lever in down (forward)

position.

When operating correctly, the machine runs smoothly with little or no vibration or rubbing noises.

Investigate and correct strange or unusual noises or vibrations before operating the machine further. Always disconnect the machine from power when investigating or correcting potential problems.

15.With the spindle ON/OFF lever in the down position, verify that the spindle/chuck is rotating counterclockwise (down and toward the front of the lathe).

If the spindle/chuck are not rotating counterclockwise, the power supply is likely connected out-of-phase. Stop the machine, disconnect it from power, then follow the instructions for Correcting Phase Polarity Wiring on Page 90.

After correcting the wiring, repeat Steps 11–15.

16.Press the STOP button to turn the lathe OFF, then, without resetting the STOP button, try to restart the lathe with the spindle ON/OFF lever.

If the lathe does not start with the STOP button pressed in, the STOP button safety feature is working properly.

If the lathe does start with the STOP button pressed in, the STOP button safety is not operating correctly. This safety feature must operate properly before continuing. Use the spindle ON/OFF lever to stop the lathe, disconnect it from power, and call Tech Support for help.

-30-

Page 36
Image 36
Southbend SB1053F Turn-X owner manual Master power switch turned on

SB1053F Turn-X specifications

The Southbend SB1053F Turn-X is a state-of-the-art oven designed to meet the high demands of commercial kitchens. Renowned for its reliability and efficiency, the Turn-X model stands out with an array of features that cater to the diverse needs of restaurants, catering services, and food production facilities.

One of the key characteristics of the SB1053F is its innovative forced-air convection system. This technology ensures that heat is evenly distributed throughout the cooking chamber, resulting in perfectly cooked food every time. The uniform airflow helps to achieve consistent cooking results, reducing the risk of hot spots and unevenly cooked dishes, which is crucial for professional chefs aiming for culinary perfection.

The Turn-X oven is equipped with a user-friendly digital control panel that allows chefs to easily program and monitor cooking times and temperatures. This feature enhances the ease of use, enabling kitchen staff to multi-task efficiently without compromising on the quality of the dishes being prepared. With pre-set cooking options, the oven can accommodate a wide range of recipes, from baking to roasting.

Another notable feature of the SB1053F is its robust construction. Built with high-quality stainless steel, the oven is designed to withstand the rigors of a busy kitchen environment. The durable exterior not only provides an appealing aesthetic but also ensures easy cleaning and maintenance, a vital aspect for maintaining hygiene in food service operations.

The Turn-X also incorporates energy-efficient technologies, providing significant cost savings. Its advanced insulation minimizes heat loss, allowing the oven to reach and maintain optimal cooking temperatures quickly while using less energy. This feature is particularly beneficial for establishments aiming to reduce their environmental footprint while controlling operational costs.

The spacious cooking chamber accommodates multiple racks, maximally utilizing the available space. This design allows for high-volume cooking, ideal for restaurants with heavy demand during peak hours. The oven’s versatility makes it suitable for various cooking styles, including baking pizzas, roasting meats, and even dehydrating fruits or vegetables.

In conclusion, the Southbend SB1053F Turn-X oven combines advanced convection technology, user-friendly controls, robust construction, and energy efficiency to create a kitchen appliance that meets the needs of today's fast-paced culinary environments. Its reliability and innovative features make it a valuable asset for any professional kitchen seeking to enhance productivity while delivering consistently high-quality food.