WARNING! Specialized shocks are only for use on designated Specialized bikes. Use of these shocks on any non-recommended bikes can result in poor performance, damage to the shock and/or bike and will void the warranty.

TERMINOLOGY

SHOCK SAG: The amount the shock compresses when the rider’s body weight is applied to the shock while sitting on the bike. Please refer to each bike model’s shock setup chart to determine correct air pressure and corresponding sag percentage.

COMPRESSION DAMPING: Controls the rate of compression of the shock. It works in conjunction with main air spring to help absorb events experienced at the rear wheel.

SPIKE VALVE: Part of the compression damping system that will dump large volumes of oil as the system encounters larger, faster bump impacts allowing for great bump absorption without over producing compression damping, which the rider feels as a form of hydraulic lock.

REBOUND DAMPING: Controls the rate of return of the shock after compression.

BRAIN FADE: Opens and closes a separate bleed circuit that allows a small amount of fluid to pass freely by the inertia valve controlled circuit. For the rider, this adjustment will reduce the firmness of the shock’s platform at ride height.

USA

FRA

ITA

MAINTENANCE

Maintenance Schedule

Every

Every 50

Every 150

 

ride

hours

hours or

 

 

 

yearly

 

 

 

 

Set sag

 

 

Adjust rebound

 

 

Clean shock body

 

 

Air sleeve maintenance

 

 

 

 

 

 

Clean aluminum pivot reducers;

 

 

check for wear; grease

 

 

 

 

 

 

Send to Service Center for inspection and

 

 

oil change

 

 

 

 

 

 

DEU

NLD

PRT

CAUTION! Be sure to wipe the shock body clean after every ride to prevent wear and damage to the shock. Failure to follow this caution will void the warranty.

All internal shock maintenance must be performed by an Authorized Service Center. For a list of Service Centers, please visit www.specialized.com or e-mail at customerservice@specialized.com.

Wash your shock with soap and water. If you ride in muddy conditions, clean and service your shock more frequently. Do not use a pressure washer!

When your shock is cycled, grease will purge from the seals. This is normal, it is not the oil leaking from the shock.

WARRANTY

For warranty provisions, please visit www.specialized.com.

ESP

JPN

5

Page 5
Image 5
Specialized ENDURO SL, EPIC, EPA manual Terminology, Maintenance, Warranty