Star Micronics NX-2410 Select Character, Width, Select character height, width, and line spacing

Select	character		width
Mode	ASCII			Decimal	Hexadecimal
Std. I	<FS>	“E”	n	1 28 69 n	IIC 45 n
	Selects a character width according to the value of n as shown below.
			n Character	width

0Normal-wide

1 Double-wide

2Triple-wide

Select character height, width, and line spacing

Mode	ASCII				Decimal			Hexadecimal
	<ESC>	“[”	“@”	<4>	27 91	64	4	iB	5B	40	04
Both	<o>	-co>	<o>	n	0	0	0 n	00	00	00	n
		m			m				m

Selects a combination of character height, width, and line spacing ac- cording to the value of n and m, as below. Does not move the base line.

n	Line spacing				Character			height
I					Unchanged
0	Unchanged
1	Unchanged				Single		height
2	Unchanged				Double		height
16	Single				Unchanged
li	Single				Single		height
18	Single				Double		height
32	Double				Unchanged
33	Double				Single		height
34	Double				Double		height
m			Character width
1	Single	width	(same	as	< ESC >	“W”	0)
2	Double	width	(same	as	< ESC >	“W”		1)
Double-height		printing temporarily				cancels the super/subscript			and

condensed printing modes, but these modes resume when the printer returns to normal height.