Star Micronics NX-2410 user manual Set line spacing to 116 inch, Set base unit for line spacing

Set line spacing to 116 inch

Mode	ASCII			Decimal		Hexadecimal
Std. 1	< ESC >	“2”	27	50	IB	32
IBM	<FS>	“2”	28	50	IC	32
	Sets the distance the paper advances or reverses in subsequent line feeds
	to l/6	inch.

Set base unit for line spacing

Mode

ASCII

Decimal

Hexadecimal

< ESC >

“1..

“\‘1

<4>

27

91

92

4

1B

5B

5C

04

IBM

<o>

<o>

<o>

<o>

0

0

0

0

00

00 00

00

n

n

n

Sets the base unit for the line spacing commands, < ESC > “3” and

<ESC > “J”. lf the value of n is 180. the base unit is set to l/180”. If the value of n is 216, the base unit is set to l/216”. If otherwise specified, this command is ignored. This command becomes effective only after

<ESC > “3” or < ESC > “J” is received. The default base unit is set to li216”.

Set line spacing to n/180 or n/276 inch

Mode		ASCII			Decimal			Hexadecimal
Both	I	-cESC>	“ ”	n	127 51	n	IIB	33	n	I
			3

Sets the distance the paper advances or reverses in subsequent line feeds to n/180 inch (Standard mode) or n/216 inch (IBM mode), where n is between 0 and 255. If n = 0, in Standard mode the line-feed distance is set to 0. but in IBM mode this command is ignored.

Set line spacing to n/360 inch

Mode	ASCII				Decimal			Hexadecimal
Bbth	<ESC>	.‘ + .’	,I	27	43	n	18	2B	n
	IFS>	‘* ”	n	28	51	n	1C	33	n
		3

Sets the distance the paper advances or reverses in subsequent line feeds to n/360 inch, where n is between 0 and 255. Ifn = 0, the line-feed distance is set to 0.

Set line spacing to n/60 oy n/72 inch

Mode	ASCII				Decimal			Hexadecimal
Std.	<ESC>	“A”	n	27	65	n	1B	41	n
IBM	<FS>	“A”	n	28	65	n	1C	41	n

Sets the distance the paper advances or reverses in subsequent line feeds to n/60 inch (Standard mode) or n/72 inch (IBM mode), where n is between 0 and 255. If n = 0, the line spacing is set to 0.

69