Star Micronics NX-2410 Cancel immediate Print, Set printer off-line, Set printer on-he, Bell

Cancel immediate		print
Mode ASCII				Decimal			Hexadecimal
c ESC >	“i”	“0”	27	105	48	1B	69	30
Both	“i”	co>	27	105	0	1B	69	00
c ESC >

Cancels the immediate print mode. The printer waits for each line to be completed before printing it, and does not scroll the paper up and down. This command is ignored when friction feed is used.

Set printer off-line

Mode	ASCII			Decimal	Hexadecimal
Std.	<DC3>			19	13
IBM	<ESC>	“0”	‘3”	27 81 36	1B 51 24

Sets the printer off-line. The printer disregards all subsequent characters

and commands except < DC1 >, which returns it to the on-line state. The printer’s On Line indicator does not go off.

Set printer on-he

Mode 1	ASCII	Decimal	Hexadecimal
Both 1	<DCl>	I 17	I 11

Returns the printer to the on-line state, allowing it to receive and process all subsequent characters and commands. This command is ignored if the printer was set off-line by pressing the On Line switch on the control panel.

Stop printing

Mode

IBM

ASCII		Decimal	Hexadecimal
< ESC >	“j”	27 106	1B 6A

Prints the entire contents of the input buffer, then sets the printer off-line. The printer’s On Line indicator goes off.

Bell

Mode 1	ASCII	Decimal	Hexadecimal
Both 1	<BEL>	I 7	I 07
	Sounds a brief beep tone from the printer’s beeper.

85