Star Micronics NX-2410 user manual Perform one n/780-inch or n/276-inch line feed

Perform one n/780-inch or n/276-inch line feed

Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“J”	n	27 74	n	1B4A	n

Feeds the paper once by n/180 inches (Standard mode) or n/216 inches (IBM mode), where n is between 0 and 255. Does not move the print position right or left when DIP switch 1-2 is OFF; returns the carriage

to the left margin if DIP switch 1-2 is ON. Does not change the

line-spacing setting.

Perform one n/180-inch reverse line feed

Mode	ASCII			Decimal		Hexadecimal		I
	< ESC >		n
Std.		“j”		21 106	n	IlB 6A	n	I

Feeds the paper once by n/180 inches in the reverse direction, where n is between 0 and 255. Does not move the print position right or left when DIP switch 1-2 is OFF; returns the carriage to the left margin if DIP switch 1-2 is ON. Does not change the line-spacing setting. Ignored when friction feed is used.

Feed paper n lines

Mode

ASCII

Decimal

Hexadecimal

Both

<ESC>

“f’

“I”

n

27

102

49

n

IB

66

31

n

<ESC>

“f

<I>

n

27

102

1

n

1B

66

01

n

Feeds the paper n lines from the current line, where n is between 0 and iii.

Set top of page at current position

1Mode 1	ASCII		I	Decimal	1	Hexadecimal	1
I
IBM	<ESC>	“4”	27	52		1B 34	I
	Sets the	current position	as the top-of-page		position.	Note that this	can

also be done from the control panel.

Set page length to n lines

Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“C”	n	21 67	n	IB 43	n

Sets the page length ton lines in the current line spacing, where n is between 1 and 127 in Standard mode or between 1 and 255 in IBM mode. Changing the line spacing later does not alter the physical page length. The current line becomes the top of the page.