8N1: Eight bits, no parity, one stop bit (default and most common)
7N1/701/7E1/7M1/7S1: Seven bits, (none/odd/even/mark/space) parity, one stop bit
8N1/801/8E1/8M1/8S1: Eight bits, (none/odd/even/mark/space) parity, one stop bit
8N2: Eight bits, no parity, two stop bits
Force DCD: Forces the Carrier Detect signal to be active at all times. Normally, DCD becomes active when a new user connects and is dropped when the last user disconnects (a response that is similar to many modems). When active, the device will logout and reset itself if the carrier signal is lost, increasing security.
NOTE: This may not work with all devices and could impair proper operation in some circumstances. The default setting is off.
Console Log: Clicking this link will open a separate Web page that will display the last 200 characters committed to that device’s console log. Note that existing data is overwritten automatically when the 200 character limit is reached.
You can simultaneously make any required changes on this menu, before applying your changes. Once complete, click Commit changes to apply the new settings. Click Refresh at any time to see an updated list of attached
Advanced Configuration Using the Integrated SSH Shell
In most cases, configuring the CABCONS1716I to the same settings as the
If you click the Connect… button next to the device you want to configure, two new windows will appear. The smaller of the two is a login screen; the other is an SSH terminal window. Click the login window and sign in as admin (using the same password as the Web interface) to activate the terminal window. You will see a welcome banner similar to the following:
Baud rate: 115200 bps, 8N1
Connected to #1: (none)... (Press
Instruction Manual
51
