UPnP Port Mapping (Universal plug and play)
Enables the enclosure to automatically find and communicate with your router and open any ports required to access the NAS over the internet. This is not recommended for most users unless you intend to access the NAS remotely.
Place a bullet under Enable or Disable next to UPnP Port Mapping depending on your preference.
Note: Once you have click enabled the enclosure will automatically attempt to update the router which could take several seconds. If you have chosen to enable UPnP please ensure UPnP has also been enabled on your router. For further assistance please contact your network administrator.
Port mapping and URL Display
The access ports can also be manually assigned and viewed from within the Service Port page of the networking section.
Below is a list of configurable and viewable items:
Administration Listen Port: Displays and enables the user to alter the access port used for the Web configuration GUI to communicate.
Administration URL: Displays the URL used to access the Web configuration GUI locally.
WebDAV Listen Port: Displays and enables the user to alter the access port used for the WebDAV to communicate.
Instruction Manual
39
