| Instruction Manual |
|
|
Storage Temperature | |
|
|
Operation Temperature | 0°C to 40°C (32°F to 104°F) |
|
|
Humidity | 80% rh, nc |
|
|
Dimensions | 310 x 440 x 44 mm |
|
|
Weight | 2200 grams (4.5 Lbs) |
|
|
Electrical | |
|
|
Frequency | |
|
|
•Source code for the unit operating system is available upon request. Please contact us by phone, live chat, or email to make your request. This offer is valid for three years from the date of purchase and/or for as long as parts or customer support is offered for this product. Charges for the reasonable cost of copying and/or conveying may apply
Caution
This is an IEC safety Class 1 product. Before using, the ground wire in the line cord or the rear panel binding post must be connected for safety.
•AC Power Source
This product is intended to operate from an AC power source that will not apply more than 250 V AC RMS between the supply conductors or between either supply conductor or ground. A protective ground connection by way of the grounding conductor in the power cord is required for safe operation.
•Use the proper Power Cord
Use only the power cord and connector appropriate for the voltage and plug configuration in your country. Use only power cord in good condition Refer cord and connector changes to qualified service personnel.
•Do Not Remove Cover
To avoid personal injury, electric shock or death, do not remove the unit cover.
•Do not operate the unit without the cover properly installed.
67
