StarTech.com SV1653DXI, SV3253DXI Subnet Mask Default Gateway, Instruction Manual, Please note

Instruction Manual

The following are the factory default values for the WAN port:

IP Address: 192.168.1.123

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.254

Broadcast: 192.168.1.255

To access the Web configuration for this product, you will need to con- figure the workstation you are using to the same subnet (255.255.255.0) and also assign it a valid IP address (i.e. 192.168.1.100). For details on how to change the IP address of your computer (if necessary), consult your documentation or System Administrator for assistance.

Please note:

•In order to avoid a conflict, it is advisable to verify whether another device on your network is using the same IP address as the SVxx53DXI before connecting it to the network.

•Should an IP address conflict occur with another device on the network, power off the conflicting device or assign it another IP address before continuing the installation.

•If you are configuring more than a single SVxx53DXI unit using the factory default settings on the WAN port, they cannot be connected to the network at the same time, as they will use the same IP address.

•Not all IP addresses are valid for a given subnet. If you are required

to change your subnet (and therefore IP address) to configure the unit, be sure the IP address you choose is within the allowable range for the 255.255.255.0 subnet.

Once your computer is configured to the same subnet as SVXX53DXI, you can use the IP address 192.168.1.123 to access the Web configura- tion system.

9