State Industries SBD71 120, SBD85 500 manual Sbd Service Checklist

SBD TANK TYPE HEATERS

SERVICE HANDBOOK

SBD SERVICE CHECKLIST

(This service checklist may be photo copied to assist with SBD service call.)

This checklist is intended to aid the Service Agent in determining that the State SBD Water Heater has been properly installed and is operating correctly. Because the circumstances of each installation may vary greatly, it is not intended to be an all- inclusive list of the problems that the Service Agent may encounter. Any item checked "no" on this list should be thoroughly investigated and corrective action taken, if required.

SERVICE AGENT	INSTALLATION DATE
MODEL NUMBER	SERVICE DATE
SERIAL NUMBER	LOCATION ADDRESS

GAS TYPE - CHECK ONE
NATURAL	PHONE( ) ___ -	____
PROPANE

I.Check Clearances (circle answer)

	A. Are exterior clearances adequate?	yes	no
	B. Are interior clearances adequate?	yes	no
	Comments:
II.	Check Makeup Air Requirements
	A. Is the quantity of make-up air adequate per the National Fuel Gas Code?	yes	no
	Comments:
	B. Is the quality of make-up air adequate?	yes	no
	Comments:

III.Gas Pressure (fill in blank)

	A.	Supply gas pressure	inches of W.C.
	B.	Manifold gas pressure (main burner)		inches of W.C.
	Comments:
IV.	Venting (check)
	A.	Properly sized per the National Fuel Gas Code?			yes	no
	B.	Does the installation have mechanically assisted venting?			yes	no
		If so, is it operational?			yes	no
		Comments:

Technical Training Department	52
Ashland City, TN ©2003