INSTALLATION INSTRUCTIONS
INSTALLATION
24
AR1407
9.4There are 10 loose pebbles in the set supplied. Each pebble is individually marked. The quantity of each type is shown below.
A1 x 3 | A4 x 1 |
A2 x 1 | A5 x 1 |
A3 x 3 | A6 x1 |
•Place the four pebbles as shown resting between the front ceramic and the flame baffle, Diagram 25
25
A4 | A5 | A3 | A6 | AR1408 |
|
•Place the next four pebbles as identified resting between the flame baffle and the first row of pebbles as shown in Diagram 26
26 |
|
|
|
| A1 |
A1 | A2 |
|
| AR1409 | |
|
|
•Place the remaining two A3 pebbles as shown in Diagram
27.
27 |
A3 |
A3 |
AR1410 |
9.5The coals/pebbles should evenly cover the whole bed with the gaps between them kept equal. This will maximise the performance of the product.
9.6ENSURE THAT THE COALS/PEBBLES ARE POSITIONED AS ABOVE. ONLY USE THE CORRECT AMOUNT OF COALS/PEBBLES AS SPECIFIED IN THE DIAGRAMS.
FITTING THE GLASS WINDOW -
9.7• Ensure that the fibre glass window seal on the box is intact, then lower the glass window into the lower retaining bracket.
•Hold the window and position the upper retaining bracket
•Secure using the 4 screws.
•Tighten the bottom and top screws to retain the window,
Diagram 28.
28
AR1465 | AR1423 |
•Refer to the separate Frame Instructions to replace the frame on the fire
NEVER OPERATE THE APPLIANCE WHEN THE GLASS PANEL IS REMOVED OR BROKEN.
22