Stovax PR0776 9A. ARRANGeMENT OF THE FUEL BED COMPONENTS - E STUDIO, Installation Instructions

INSTALLATION INSTRUCTIONS

INSTALLATION

9A. ARRANGeMENT OF THE

FUEL BED COMPONENTS - E STUDIO

ONLY USE THE CORRECT TYPE AND QUANTITY OF GRANITE CHIPPINGS. Always follow the fuel bed layout as stated in these instructions. NEVER change the layout from that shown here.

9.1• Arrange the granite chippings in the areas highlighted in

Diagram 8. Granite chippings should be evenly distributed.

8

AR1997

•Lean the granite chippings against the burner ledges to disguise the ledges, Diagram 9

59

AR1769

•Check that the port area. Arrow A, , Diagram 10 is clear of granite chippings. This can be easily done by gently running a screwdriver or similar object along this area.

NOTE: IT IS IMPORTANT THE GRANITE CHIPPINGS DO NOT COVER THE PORT AREA IN BETWEEN THE BURNER LEDGES.

105

A

AR1997

•Ensure that no chippings over-hang or fill the pilot area,

Arrow B, Diagram 11.

NOTE: CHIPPINGS SHOULD NOT BE PLACED DIRECTLY IN FRONT OF THE PILOT CROSS LIGHTING FLAME.

115	B	B
		AR1998

FITTING THE GLASS WINDOW - E-STUDIO

•Ensure that the fibre glass window seal on the box is intact.

•Replace the one-piece glass window frame ensuring that all 8 fixings are tight, Diagram 12.

125

AR1769

NEVER OPERATE THE FIRE WHEN THE GLASS PANEL IS REMOVED OR BROKEN

•Refer to the separate Frame Instructions to replace the frame on the fire

19