SERVICING INSTRUCTIONS
REPLACING PARTS
5
AR2001
•Remove the 11 screws that fix the burner assembly into the appliance, Diagram 6. The burner assembly can now be removed by lifting it up and out of the appliance.
56
AR1980
2B. E-BOX
•Remove the glass window by loosening the four screws in the lower retaining bracket then remove the four top screws and retaining bracket. The glass window can now be lifted clear, Diagram 7
7
AR1465 | AR1423 |
|
•Remove the ceramic coals and fuel bed and place on a dry clean surface
•Remove the ceramic panels from inside the appliance
•Remove the two screws securing the front U channel on the burner assembly. This is to gain access to the burner retaining screws, Diagram 8.
8 |
AR1432 |
2.14• Remove the 11 screws in the burner tray securing the burner assembly to the appliance. The burner assembly can now be removed by lifting it up and out of the appliance, Diagram 9.
9
AR1433
3. Pilot unit
The pilot unit assembly consists of three components which can be individually changed, these are:-
1)Pilot Injector
2)Electrode
3)Thermocouple
Note: On the
27