USER INSTRUCTIONS
6A. ARRANGeMENT OF THE
FUEL BED COMPONENTS - E STUDIO
ONLY USE THE CORRECT TYPE AND QUANTITY OF GRANITE CHIPPINGS. Always follow the fuel bed layout as stated in these instructions. NEVER change the layout from that shown here.
6.1• Arrange the granite chippings in the areas highlighted in
Diagram 4. Granite chippings should be evenly distributed.
4
AR1997
•Lean the granite chippings against the burner ledges to disguise the ledges, Diagram 5
5
AR1769
•Check that the port area. Arrow A, Diagram 6 is clear of granite chippings. This can be easily done by gently running a screwdriver or similar object along this area.
NOTE: IT IS IMPORTANT THE GRANITE CHIPPINGS DO NOT COVER THE PORT AREA IN BETWEEN THE BURNER LEDGES.
65
A
AR1997
•Ensure that no chippings overhang or fill the pilot area,
Arrow B, Diagram 7.
NOTE: CHIPPINGS SHOULD NOT BE PLACED DIRECTLY IN FRONT OF THE PILOT CROSS LIGHTING FLAME.
57 | B | B |
|
| AR1998 |
FITTING THE GLASS WINDOW - E-STUDIO
6.2• Ensure that the fibre glass window seal on the box is intact
• Replace the
58
AR1996
NEVER OPERATE THE FIRE WHEN THE GLASS PANEL IS REMOVED OR BROKEN
6
