USER INSTRUCTIONS
•Refer to the separate Frame Instructions to replace the frame on the fire
6B. ARRANGeMENT OF THE FUEL BED COMPONENTS - E-BOX
NOTE: CERAMIC PARTS ARE FRAGILE. HANDLE WITH CARE
ONLY USE THE CORRECT TYPE AND QUANTITY OF CERAMIC COMPONENTS
6.3• Place the rear panel against the rear of the box resting on the shelf
•Slide one of the side panels into the box ensuring it touches the rear panel
•Gently ease the front edge of the side panel behind the flange so it lies flat against the wall of the box
•Repeat with the second side panel, Diagram 9
9
AR1359 | AR1360 |
•Locate the top panel on top of the sides and rear by lifting it up and forward inside the box
•Slide it backwards and down behind the side panels to rest on the rear panel, Diagram 10
5
10
AR1426
COAL LAYOUT
6.4• Position the flame baffle centrally on the tray and ensure the stepped lower edge engages against the rear edge of the burner skin, Diagram 11
11
AR1362
•Place the front coal centrally in the channel at the front of the tray. The relationship between the front coal and the flame baffle is shown, Diagram 12.
12
AR1363
6.5There are three sizes of coal used. Small x3, medium x4 and large x1. For identification, Diagram 13.
13
LARGE | MEDIUM | SMALL |
AR1379
•Place the single large coal in the central dent of the front coal resting against the flame baffle, Diagram 14.
7
