USER INSTRUCTIONS
21
A4 | A5 | A3 | A6 | AR1408 |
|
•Place the next four pebbles as shown resting between the flame baffle and the first row of pebbles, Diagram 22.
22 |
|
|
|
| A1 |
A1 | A2 |
|
| AR1409 | |
|
|
•Place the remaining two A3 pebbles as shown in
Diagram 23.
23 |
A3 |
A3 |
AR1410 |
6.7The coals/pebbles should evenly cover the whole bed with the gaps between them kept equal. This will maximise the performance of the product.
6.8ENSURE THAT THE COALS/PEBBLES ARE POSITIONED AS ABOVE. ONLY USE THE CORRECT AMOUNT OF COALS/PEBBLES AS SPECIFIED IN THE DIAGRAMS.
FITTING THE GLASS WINDOW - E-BOX
6.9• Ensure that the fibre glass window seal on the box is intact, then lower the glass window into the lower retaining bracket.
•Hold the window and position the upper retaining bracket
•Secure using the 4 screws.
•Tighten the bottom and top screws to retain the window,
Diagram 24.
24
AR1465 | AR1423 |
|
•Refer to the separate Frame Instructions to replace the frame on the fire.
NEVER OPERATE THE APPLIANCE WHEN THE GLASS PANEL IS REMOVED OR BROKEN.
7.flame failure device
7.1This is a safety feature incorporated on this appliance which automatically switches off the gas supply if the pilot goes out and fails to heat the thermocouple.
8.running in
8.1The surface coating on the coals used in your GAZCO fire will "burn off" during the first few hours of use producing a harmless and temporary odour. This will disappear after a short period of use. If the odour persists, ask your installer for advice.
9.servicing
9.1The fire must be serviced every 12 months by a qualified Gas Engineer. In all correspondence always quote the Model number and the Serial number which may be found on the databadge.
9
