Sunbeam 2360, 2356 Cleaning Your Mixer, To remove the worklight lens, place, Bowl from turntable

CARING FOR YOUR MIXER

EJECTING THE BEATERS OR DOUGH HOOKS

After you’ve finished mixing, turn the Mix-Finder®dial to OFF and unplug the electric cord from the electrical outlet. Push the ejector button located near the handle to remove beaters or dough hooks.

Scrape excess batter off the beaters using a rubber or plastic spatula. Do not strike beaters on the rim of the bowl.

CLEANING YOUR MIXER

To clean the mixer, wipe the mixer head, stand, and turntable with a damp cloth, then dry. DO NOT IMMERSE THE MIXER HEAD OR STAND IN WATER. Avoid the use of abrasive cleaners, as they may mar the finish of the mixer.

Wash the beaters and bowls in hot, soapy water after each use. Rinse thoroughly and dry. Beaters and bowls may also be washed in an automatic dishwasher.

CARE AND CLEANING OF THE WORKLIGHT

(For models with worklight feature only.).

The worklight bulb should be replaced as soon as it burns out. You may also wish to remove the worklight lens periodically for cleaning.

To remove the worklight lens, place

the Mix-Finder®dial in the ZERO position and unplug mixer from electrical outlet. Remove beaters or dough hooks from mixer sockets and remove

bowl from turntable.

Holding the mixer head in an upright position, use a small screwdriver to remove the screw holding the worklight lens in place.

Squeeze the worklight lens, as shown, until the tabs on the lens clear the housing. Tilt the worklight lens down and out of the housing.

To clean the worklight lens, wash in warm, soapy water. Rinse and dry thoroughly.

To replace the worklight bulb, unscrew from socket. Replace with new bulb.

8