Sunbeam 2359 Operating Instructions, About the Worklight Feature, About the Mix-Finder¨ Dial

The dough hook with the small washer and foot goes into the socket on the side of the mixer nearest the side of the bowl. The other dough hook with the large washer goes into the socket nearest the center of the bowl. See the dough hook symbols located on the front of the mixer head.

About the Worklight Feature

Some of our models have a worklight that lights the area inside the mixing bowl.

As soon as the electric cord is plugged in, the worklight will glow. It will continue to glow until the electric cord is unplugged from the electrical outlet.

Worklight

Beater-Bowl Drive Adjustment

Automatic bowl rotation is factory set. Occasionally, a simple adjustment may be necessary when the bowl fails to rotate.

To make this adjustment, tilt the mixer head back. Hold the mixer head in an upright position and locate the adjustment screw on the underside of the mixer head. Loosen the locking nut and turn the adjustment screw on the underside of the mixer head. Loosen the locking nut and turn the adjustment screw clockwise, to lower the mixer head; or counter clockwise, to raise the mixer head. Retighten the locking nut. The beater with the nylon button should lightly touch the bottom of the mixing bowl.

Adjustment	Locking
Screw	Nut

Operating Instructions

About the Mix-Finder¨ Dial

The Mix-Finder®dial is used for turning the mixer ON and OFF and for selecting its 12 mixing speeds.

Rotate the Mix-Finder®dial in a clockwise direction, to increase mixing speed; and in a counterclockwise direction,

to decrease mixing speed.

As you rotate the Mix-Finder®dial, notice that a numbered speed

is aligned with the indicator on top of the mixer head. This numbered speed indicates the speed at which the mixer is operating.

Rotate the Mix-Finder®dial until the indicator is opposite the numbered speed you wish to use.

Speed

Indicator

Mix-Finder®

Dial

Mixing

Guide

6