To use automatic search | Sunwave Tech SRC-3310/9320 specs

4.You may also use the TUNING buttons to increase or decrease the code.

When finished, press the OK button to return to the Setup Menu.

When you enter the Manufacture Code , but shows ‘ERROR’ message, two possibilities maybe caused :

1.That code number is not existed among the Manufacture Code table yet.

2.That code number is not in the range of Manufacture Code table reserved for the default device screen .

To use automatic search:

Automatic Search

5.Make sure the SRC-93 SERIES is pointing at the device you want to control and press the AUTO button.

The AUTO button will flash while the SRC-93 SERIES automatically cycles through the codes. Wait for the device to turn on and then press the

POWER button or AUTO button to stop the automatic search.

The last tried code will be displayed in the upper right hand corner. You can test this code by pressing POWER button. (You may need to press TUNING Down and try the previous few codes.)

6.Once your device turns on (or off) when you press the POWER button, press the OK button to return to the SETUP menu.

19

Image 23

Sunwave Tech SRC-3310/9320 manual To use automatic search, Power button or Auto button to stop the automatic search

Contents

031021 SRC-9310/9320 Preface Table of Contents Controlling Devices Introducing the SRC-93 Series Alkaline Battery Unpacking the SRC-93 Series SRC-93 Series FeaturesFollowing list identifies the SRC-93’s key features Front and Rear Views Identifying Components Getting Started Features OverviewPage Installing Batteries Installing Batteries Battery Tips and Precautions Battery Low Indicator Please read the following instructions carefully Touch Screen PrecautionsTouch Screen Turning the Touch Screen On Touch Screen Buttons Rubber Buttons Confirm Menu Entry by Pressing Numbers Menus Menu Description Setup Menu Macro Menu Delete Menu Creating a New Device Setting Up the SRC-93 Series to Control a DevicePress and hold the Setup button on Touch Screen Choosing a Device Press the OK button to confirm Re-Labeling DevicesModifying an Existing Device Changing Touch Screen Layout Press OK to confirm your changes Programming Infrared CodesTouch the button that you wish to change Using Manufacturer Codes To use manual entry There are two ways to program the manufacture codes To use automatic search Power button or Auto button to stop the automatic search Before Using the Learning Function Using the Learning Function Learning from Another Remote Control Rubber Keys Press and hold the Setup button on the Touch Screen SoftKey To collect unrecognized codes Collecting Unrecognized Infrared CodesAll unrecognized codes should be sent to this address Select the key you want to erase Deleting a Specific KeyDeleting a Device Press and hold the Delete button on the Touch Screen Select the device you wish to delete To delete a device from the SRC-93 Series follow these steps Changing Touch Screen Controlling DevicesSelecting Device to Control Controlling the Device Using the AUX Key Creating a Macro Sequence Creating and Using MacrosIntroduction to Macros Set up the macro using the following steps Press OK to save the Macro Deleting a Macro Using Macros SRC-93 Series has the following additional features Other FeaturesUsing Timers Press and hold the Macro button on the Touch Screen Setting Up a New Timer Use the arrow keys to select the time Using Quick Channel ListsWhen finished press the Exit key to leave the Macro Menu Setting up Quick Channel Lists Press and hold the Delete button on Touch Screen Press Exit when finished and leave the Delete menuDeleting Channels from a Quick Channel List Using Quick Channel Lists Transmitting System Setup To use sleep mode Using Sleep Mode Enter the year, month, and date first Press OK when finished Now set the hour, and minutesDisplaying Version Number Date and Clock Use the arrow keys to set the backlight period Power Down Time PeriodUse the arrow keys to set the power down time Backlight On Time Period Use the OK button to toggle the beep from on to OFF Resetting to Factory DefaultsPress OK to reset the SRC-93 Beep Toggling Model SRC-9310 SRC-9320 Appendix a Specifications USB cable Appendix B AccessoriesSLC-2080 Problem Solution Appendix C Troubleshooting Problem Solution IR Learning