Deleting a Specific Key | Sunwave Tech SRC-3310/9320 guide

Deleting a Specific Key

To erase the infrared codes for a specific Touch Screen or Rubber key, follow these steps:

Press and hold the DELETE button on the Touch Screen.

Press each number button (2, 4, 6, 8) until it disappears.

Use the arrow buttons on the Touch Screen to select KEY and then press the OK button.

1.Select the device that has the key that you want to erase.

(ex. Press TV button)

2.Select the key you want to erase.

3.If you want to erase more keys, you may select them now.

4.Then press the EXIT key to leave the DELETE Menu.

Deleting a Device

If you have an unused or an unwanted device, you may erase either the infrared codes for the device but keep the Touch Screen layout the same, or you may erase both the codes and the Touch Screen layout.

25

Image 29

Sunwave Tech SRC-3310/9320 manual Deleting a Specific Key, Deleting a Device, Select the key you want to erase

Contents

031021 SRC-9310/9320 Preface Table of Contents Controlling Devices Introducing the SRC-93 Series Alkaline Battery Unpacking the SRC-93 Series SRC-93 Series FeaturesFollowing list identifies the SRC-93’s key features Front and Rear Views Identifying Components Getting Started Features OverviewPage Installing Batteries Installing Batteries Battery Tips and Precautions Battery Low Indicator Touch Screen Touch Screen PrecautionsTurning the Touch Screen On Please read the following instructions carefully Touch Screen Buttons Rubber Buttons Confirm Menu Entry by Pressing Numbers Menus Menu Description Setup Menu Macro Menu Delete Menu Press and hold the Setup button on Touch Screen Setting Up the SRC-93 Series to Control a DeviceChoosing a Device Creating a New Device Press the OK button to confirm Re-Labeling DevicesModifying an Existing Device Changing Touch Screen Layout Press OK to confirm your changes Programming Infrared CodesTouch the button that you wish to change Using Manufacturer Codes To use manual entry There are two ways to program the manufacture codes To use automatic search Power button or Auto button to stop the automatic search Before Using the Learning Function Using the Learning Function Learning from Another Remote Control Rubber Keys Press and hold the Setup button on the Touch Screen SoftKey To collect unrecognized codes Collecting Unrecognized Infrared CodesAll unrecognized codes should be sent to this address Deleting a Device Deleting a Specific KeyPress and hold the Delete button on the Touch Screen Select the key you want to erase Select the device you wish to delete To delete a device from the SRC-93 Series follow these steps Changing Touch Screen Controlling DevicesSelecting Device to Control Controlling the Device Using the AUX Key Creating a Macro Sequence Creating and Using MacrosIntroduction to Macros Set up the macro using the following steps Press OK to save the Macro Deleting a Macro Using Macros SRC-93 Series has the following additional features Other FeaturesUsing Timers Press and hold the Macro button on the Touch Screen Setting Up a New Timer Use the arrow keys to select the time Using Quick Channel ListsWhen finished press the Exit key to leave the Macro Menu Setting up Quick Channel Lists Press and hold the Delete button on Touch Screen Press Exit when finished and leave the Delete menuDeleting Channels from a Quick Channel List Using Quick Channel Lists Transmitting System Setup To use sleep mode Using Sleep Mode Displaying Version Number Press OK when finished Now set the hour, and minutesDate and Clock Enter the year, month, and date first Use the arrow keys to set the power down time Power Down Time PeriodBacklight On Time Period Use the arrow keys to set the backlight period Press OK to reset the SRC-93 Resetting to Factory DefaultsBeep Toggling Use the OK button to toggle the beep from on to OFF Model SRC-9310 SRC-9320 Appendix a Specifications USB cable Appendix B AccessoriesSLC-2080 Problem Solution Appendix C Troubleshooting Problem Solution IR Learning