SRC-93 SERIES User’s Manual

1.Press the device key you wish to use for this device. For example, if this is a new TV you should press the TV button. For a new DVD player, press the DVD button.

2.Give your new Device a label. Use the UP and DOWN arrows to change the letter. Use the LEFT and RIGHT arrows to change the position. (Labels can be four digits long.)

Press the OK button.

3.Select one device attribute to load the default device screen.

Use the UP and DOWN arrows to choose.

4.Press the OK button to confirm.

Modifying an Existing Device

If you want to modify an existing device that is already setup in the SRC-93 SERIES, no additional preparation is required and you may proceed directly to the Touch Screen layout changing section on page 15.

Re-Labeling Devices

You may want to re-label an old device and you can do this using the LABL selection in the SETUP Menu:

14

Page 18
Image 18
Sunwave Tech SRC-3310/9320 manual Re-Labeling Devices, Modifying an Existing Device, Press the OK button to confirm