Controlling the Device | Sunwave Tech SRC-3310/9320 specification

SRC-93 SERIES User’s Manual

Controlling the Device

Make sure the SRC-93 SERIES is pointing at the device you are trying to control and simply press the button you want to send:

•Press the Touch Screen buttons.

•Press one of the rubber buttons on the bottom half of the SRC-93 SERIES’s.

Record Button Must Be Held Down for 2 Seconds: As a safety feature, the record button needs to be pressed for 2 seconds. This is to prevent accidentally pressing the VCR record button and overwriting a tape.

Using the AUX Key

The control buttons on the AUX device screen can easily be made identical to the control buttons on any other device screen. You can use it to operate a TV, VCR, etc. For more information please see Creating a New Device on page 13.

28

Image 32

Sunwave Tech SRC-3310/9320 manual Controlling the Device, Using the AUX Key

Contents

SRC-9310/9320 031021 Preface Table of Contents Controlling Devices Alkaline Battery Introducing the SRC-93 Series Unpacking the SRC-93 Series SRC-93 Series FeaturesFollowing list identifies the SRC-93’s key features Identifying Components Front and Rear Views Features Overview Getting StartedPage Installing Batteries Installing Batteries Battery Low Indicator Battery Tips and Precautions Touch Screen Precautions Touch ScreenTurning the Touch Screen On Please read the following instructions carefully Rubber Buttons Touch Screen Buttons Menus Confirm Menu Entry by Pressing Numbers Setup Menu Menu Description Delete Menu Macro Menu Setting Up the SRC-93 Series to Control a Device Press and hold the Setup button on Touch ScreenChoosing a Device Creating a New Device Press the OK button to confirm Re-Labeling DevicesModifying an Existing Device Changing Touch Screen Layout Press OK to confirm your changes Programming Infrared CodesTouch the button that you wish to change Using Manufacturer Codes There are two ways to program the manufacture codes To use manual entry Power button or Auto button to stop the automatic search To use automatic search Using the Learning Function Before Using the Learning Function Learning from Another Remote Control Press and hold the Setup button on the Touch Screen Rubber Keys SoftKey To collect unrecognized codes Collecting Unrecognized Infrared CodesAll unrecognized codes should be sent to this address Deleting a Specific Key Deleting a DevicePress and hold the Delete button on the Touch Screen Select the key you want to erase To delete a device from the SRC-93 Series follow these steps Select the device you wish to delete Changing Touch Screen Controlling DevicesSelecting Device to Control Using the AUX Key Controlling the Device Creating a Macro Sequence Creating and Using MacrosIntroduction to Macros Set up the macro using the following steps Press OK to save the Macro Using Macros Deleting a Macro SRC-93 Series has the following additional features Other FeaturesUsing Timers Setting Up a New Timer Press and hold the Macro button on the Touch Screen Use the arrow keys to select the time Using Quick Channel ListsWhen finished press the Exit key to leave the Macro Menu Setting up Quick Channel Lists Press and hold the Delete button on Touch Screen Press Exit when finished and leave the Delete menuDeleting Channels from a Quick Channel List Transmitting System Setup Using Quick Channel Lists Using Sleep Mode To use sleep mode Press OK when finished Now set the hour, and minutes Displaying Version NumberDate and Clock Enter the year, month, and date first Power Down Time Period Use the arrow keys to set the power down timeBacklight On Time Period Use the arrow keys to set the backlight period Resetting to Factory Defaults Press OK to reset the SRC-93Beep Toggling Use the OK button to toggle the beep from on to OFF Appendix a Specifications Model SRC-9310 SRC-9320 USB cable Appendix B AccessoriesSLC-2080 Appendix C Troubleshooting Problem Solution Problem Solution IR Learning