Using the Learning Function | Sunwave Tech SRC-3310/9320 guide

SRC-93 SERIES User’s Manual

The AUTO mode‘s preprogrammed code circle depends on the range of Manufacture Code table reserved for that default device screen. Ex. TV’s preprogrammed code circle will be from 0 ~255.

Using the Learning Function

If you have the original remote, the SRC-93 SERIES has the ability to directly learn infrared codes.

Before Using the Learning Function

Before you start using the SRC-93 SERIES's learning function, please heed the following precautions:

•Not all infrared codes are learnable by the SRC-93 SERIES. You may need to first collect the codes (see page 24 for more information) and then email them to SUNWAVE. New system software will then be sent to you allowing your SRC-93 SERIES to learn the codes.

•To change from a device that has already been programmed, delete all of the commands for the first device before teaching new ones. For example, to operate the living room TV instead of the bedroom TV, delete all commands for the bedroom TV first. Then re-configure the TV device screen for the living room TV.

•When using the learning function, you must press each button within 2 minutes of pressing the last button. Otherwise, the SRC- 93 SERIES will exit the learning mode and return to its normal operation mode.

20

Image 24

Sunwave Tech SRC-3310/9320 manual Before Using the Learning Function

Contents

SRC-9310/9320 031021 Preface Table of Contents Controlling Devices Alkaline Battery Introducing the SRC-93 Series SRC-93 Series Features Following list identifies the SRC-93’s key featuresUnpacking the SRC-93 Series Identifying Components Front and Rear Views Features Overview Getting StartedPage Installing Batteries Installing Batteries Battery Low Indicator Battery Tips and Precautions Touch Screen Precautions Touch ScreenTurning the Touch Screen On Please read the following instructions carefully Rubber Buttons Touch Screen Buttons Menus Confirm Menu Entry by Pressing Numbers Setup Menu Menu Description Delete Menu Macro Menu Setting Up the SRC-93 Series to Control a Device Press and hold the Setup button on Touch ScreenChoosing a Device Creating a New Device Re-Labeling Devices Modifying an Existing DevicePress the OK button to confirm Changing Touch Screen Layout Programming Infrared Codes Touch the button that you wish to changePress OK to confirm your changes Using Manufacturer Codes There are two ways to program the manufacture codes To use manual entry Power button or Auto button to stop the automatic search To use automatic search Using the Learning Function Before Using the Learning Function Learning from Another Remote Control Press and hold the Setup button on the Touch Screen Rubber Keys SoftKey Collecting Unrecognized Infrared Codes All unrecognized codes should be sent to this addressTo collect unrecognized codes Deleting a Specific Key Deleting a DevicePress and hold the Delete button on the Touch Screen Select the key you want to erase To delete a device from the SRC-93 Series follow these steps Select the device you wish to delete Controlling Devices Selecting Device to ControlChanging Touch Screen Using the AUX Key Controlling the Device Creating and Using Macros Introduction to MacrosCreating a Macro Sequence Set up the macro using the following steps Press OK to save the Macro Using Macros Deleting a Macro Other Features Using TimersSRC-93 Series has the following additional features Setting Up a New Timer Press and hold the Macro button on the Touch Screen Using Quick Channel Lists When finished press the Exit key to leave the Macro MenuUse the arrow keys to select the time Setting up Quick Channel Lists Press Exit when finished and leave the Delete menu Deleting Channels from a Quick Channel ListPress and hold the Delete button on Touch Screen Transmitting System Setup Using Quick Channel Lists Using Sleep Mode To use sleep mode Press OK when finished Now set the hour, and minutes Displaying Version NumberDate and Clock Enter the year, month, and date first Power Down Time Period Use the arrow keys to set the power down timeBacklight On Time Period Use the arrow keys to set the backlight period Resetting to Factory Defaults Press OK to reset the SRC-93Beep Toggling Use the OK button to toggle the beep from on to OFF Appendix a Specifications Model SRC-9310 SRC-9320 Appendix B Accessories SLC-2080USB cable Appendix C Troubleshooting Problem Solution Problem Solution IR Learning