IR Learning | Sunwave Tech SRC-3310/9320 instruction

Problem	Solution
A button of your	Some remotes issue multiple commands
existing remote	when a button is held down. Please be
performs two or	sure to teach different buttons of SRC-93
more functions	SERIES for these different commands.
	Each button of SRC-93 SERIES can only
	learn one command.
The LCD screen	The SRC-93 SERIES is preset automatically
turns off.	to switch the LCD off after the Power
	Down time. Just tap the LCD screen or
	any button to turn the SRC-93 SERIES
	back on again. You can also reset the
	Power Down time period. (page 41)
IR LEARNING	Replace batteries in the SRC-93 SERIES
cannot be made	and the remote you are trying to learn
successfully.	from.
	Keep distance between remotes to
	about 2~4 inches.
	Do not learn near an incandescent
	lamp.
	Memory capacity is full (56 keys for each
	of 16 models).
	The learning process has no errors, but
	you still can’t control your AV devices:
	repeat the learning procedure again. If
	you still can’t solve the problem, use the
	code collection feature and email
	codes to Sunwave. (page 24)
	Original remote might not be
	compatible with learning procedure.

47

Image 51

Sunwave Tech SRC-3310/9320 manual IR Learning

Contents

031021 SRC-9310/9320 Preface Table of Contents Controlling Devices Introducing the SRC-93 Series Alkaline Battery SRC-93 Series Features Following list identifies the SRC-93’s key featuresUnpacking the SRC-93 Series Front and Rear Views Identifying Components Getting Started Features OverviewPage Installing Batteries Installing Batteries Battery Tips and Precautions Battery Low Indicator Please read the following instructions carefully Touch Screen PrecautionsTouch Screen Turning the Touch Screen On Touch Screen Buttons Rubber Buttons Confirm Menu Entry by Pressing Numbers Menus Menu Description Setup Menu Macro Menu Delete Menu Creating a New Device Setting Up the SRC-93 Series to Control a DevicePress and hold the Setup button on Touch Screen Choosing a Device Re-Labeling Devices Modifying an Existing DevicePress the OK button to confirm Changing Touch Screen Layout Programming Infrared Codes Touch the button that you wish to changePress OK to confirm your changes Using Manufacturer Codes To use manual entry There are two ways to program the manufacture codes To use automatic search Power button or Auto button to stop the automatic search Before Using the Learning Function Using the Learning Function Learning from Another Remote Control Rubber Keys Press and hold the Setup button on the Touch Screen SoftKey Collecting Unrecognized Infrared Codes All unrecognized codes should be sent to this addressTo collect unrecognized codes Select the key you want to erase Deleting a Specific KeyDeleting a Device Press and hold the Delete button on the Touch Screen Select the device you wish to delete To delete a device from the SRC-93 Series follow these steps Controlling Devices Selecting Device to ControlChanging Touch Screen Controlling the Device Using the AUX Key Creating and Using Macros Introduction to MacrosCreating a Macro Sequence Set up the macro using the following steps Press OK to save the Macro Deleting a Macro Using Macros Other Features Using TimersSRC-93 Series has the following additional features Press and hold the Macro button on the Touch Screen Setting Up a New Timer Using Quick Channel Lists When finished press the Exit key to leave the Macro MenuUse the arrow keys to select the time Setting up Quick Channel Lists Press Exit when finished and leave the Delete menu Deleting Channels from a Quick Channel ListPress and hold the Delete button on Touch Screen Using Quick Channel Lists Transmitting System Setup To use sleep mode Using Sleep Mode Enter the year, month, and date first Press OK when finished Now set the hour, and minutesDisplaying Version Number Date and Clock Use the arrow keys to set the backlight period Power Down Time PeriodUse the arrow keys to set the power down time Backlight On Time Period Use the OK button to toggle the beep from on to OFF Resetting to Factory DefaultsPress OK to reset the SRC-93 Beep Toggling Model SRC-9310 SRC-9320 Appendix a Specifications Appendix B Accessories SLC-2080USB cable Problem Solution Appendix C Troubleshooting Problem Solution IR Learning