Rubber Keys | Sunwave Tech SRC-3310/9320 instruction

SRC-93 SERIES User’s Manual

To learn infrared codes directly from a device’s remote control, follow these steps:

Press and hold the SETUP button on the Touch Screen.

Press each number button (2, 4, 6, 8) until it disappears.

Use the arrow buttons on the Touch Screen to select LRN and then press the OK button.

1.Use the device keys to select the device you want to program.

Make sure the other remote control is pointed directly at the SRC-93 SERIES’s Learning eye. Keep them 2~4 inches apart. (5~10 cm)

Rubber Keys

The first screen shown represents the rubber buttons (Rubber Keys) on the bottom half of the SRC-93 SERIES. You can program each button using this screen.

2.Use the Touch screen to select which key you want to program – it should now be flashing.

The DEVICE key’s code will be sent when you press the device button on the SRC-93 SERIES. (For example when you press TV, VCR,, etc....)

22

Image 26

Sunwave Tech SRC-3310/9320 manual Press and hold the Setup button on the Touch Screen, Rubber Keys

Contents

SRC-9310/9320 031021 Preface Table of Contents Controlling Devices Alkaline Battery Introducing the SRC-93 Series Unpacking the SRC-93 Series SRC-93 Series FeaturesFollowing list identifies the SRC-93’s key features Identifying Components Front and Rear Views Features Overview Getting StartedPage Installing Batteries Installing Batteries Battery Low Indicator Battery Tips and Precautions Turning the Touch Screen On Touch Screen PrecautionsTouch Screen Please read the following instructions carefully Rubber Buttons Touch Screen Buttons Menus Confirm Menu Entry by Pressing Numbers Setup Menu Menu Description Delete Menu Macro Menu Choosing a Device Setting Up the SRC-93 Series to Control a DevicePress and hold the Setup button on Touch Screen Creating a New Device Press the OK button to confirm Re-Labeling DevicesModifying an Existing Device Changing Touch Screen Layout Press OK to confirm your changes Programming Infrared CodesTouch the button that you wish to change Using Manufacturer Codes There are two ways to program the manufacture codes To use manual entry Power button or Auto button to stop the automatic search To use automatic search Using the Learning Function Before Using the Learning Function Learning from Another Remote Control Press and hold the Setup button on the Touch Screen Rubber Keys SoftKey To collect unrecognized codes Collecting Unrecognized Infrared CodesAll unrecognized codes should be sent to this address Press and hold the Delete button on the Touch Screen Deleting a Specific KeyDeleting a Device Select the key you want to erase To delete a device from the SRC-93 Series follow these steps Select the device you wish to delete Changing Touch Screen Controlling DevicesSelecting Device to Control Using the AUX Key Controlling the Device Creating a Macro Sequence Creating and Using MacrosIntroduction to Macros Set up the macro using the following steps Press OK to save the Macro Using Macros Deleting a Macro SRC-93 Series has the following additional features Other FeaturesUsing Timers Setting Up a New Timer Press and hold the Macro button on the Touch Screen Use the arrow keys to select the time Using Quick Channel ListsWhen finished press the Exit key to leave the Macro Menu Setting up Quick Channel Lists Press and hold the Delete button on Touch Screen Press Exit when finished and leave the Delete menuDeleting Channels from a Quick Channel List Transmitting System Setup Using Quick Channel Lists Using Sleep Mode To use sleep mode Date and Clock Press OK when finished Now set the hour, and minutesDisplaying Version Number Enter the year, month, and date first Backlight On Time Period Power Down Time PeriodUse the arrow keys to set the power down time Use the arrow keys to set the backlight period Beep Toggling Resetting to Factory DefaultsPress OK to reset the SRC-93 Use the OK button to toggle the beep from on to OFF Appendix a Specifications Model SRC-9310 SRC-9320 USB cable Appendix B AccessoriesSLC-2080 Appendix C Troubleshooting Problem Solution Problem Solution IR Learning