SUPERSERVER 6012P-6 User’s Manual

5-8 Connector Definitions

ATX Power Connection

The power supply connector meets the SSI (Superset ATX) 20- pin specification. Make sure that the orientation of the connector is correct. See the table on the right for pin definitions.

ATX Power Supply 20-pin Connector

Pin Number Definition

Pin Number Definition

11

+3.3V

1

+3.3V

12

-12V

2

+3.3V

13

COM

3

COM

14

PS_ON

4

+5V

15

COM

5

COM

16

COM

6

+5V

17

COM

7

COM

18

-5V

8

PW -OK

19

+5V

9

5VSB

20

+5V

10

+12V

 

 

 

 

PWR_SEC Connection

In addition to the Primary ATX power connector (above), the Secondary 12v 8-pin J15 connector must also be connected to your power supply. See the table on the right for pin defi- nitions.

NMI Button

The non-maskable interrupt button header is located on pins 19 and 20 of JF2. Refer to the table on the right for pin definitions.

Power LED

The Power LED connection is lo- cated on pins 15 and 16 of JF2. Refer to the table on the right for pin definitions.

HDD LED

The HDD (IDE Hard Disk Drive) LED connection is located on pins 13 and 14 of JF2. Attach the IDE hard drive LED cable to display disk ac- tivity. Refer to the table on the right for pin definitions.

8-Pin +12v Power Supply

Connector (J15)

Pins Definition

1 thru 4

Ground

5 thru 8

+12v

NMI Button Pin

Definitions (JF2)

Pin

Number Definition

19Ground

20Control

PWR_LED Pin Definitions

(JF2)

Pin

Number Definition

15Vcc

16Control

HDD LED Pin

Definitions

(JF2)

Pin

Number Definition

13Vcc

14HD Active

5-12

Page 48
Image 48
SUPER MICRO Computer 6012P-6 Connector Definitions, ATX Power Connection, Pwrsec Connection, NMI Button, Power LED