SUPER MICRO Computer 6012P-6 ECC Configuration, ECC Error Type, Serr Signal Condition, CPU Speed

SUPERSERVER 6012P-6 Manual

ECC Configuration

This setting lets you enable or disable ECC (Error Correction and Checking). The options are ECC and Disabled.

ECC Error Type

This setting lets you select which type of interrupt will be activated as a result of an ECC error. The options are None, NMI (Non-Maskable Interrupt), SMI (System Management Interrupt) and SCI (System Control Interrupt.

SERR Signal Condition

This setting specifies the conditions required to qualify as an ECC error. Options are None, Single Bit, Multiple Bit and Both.

!Advanced Processor Options

Access the submenu to make changes to the following settings.

CPU Speed

This is a display that indicates the speed of the installed processor.

Frequency Ratio

This setting allows you to specify the value of tthe internal frequency multiplier of the processor, which is used to determine the processor speed. Options are x8, x16, x17, x18, x19 and x20.

Fast String Operations

This setting allows you to Enable or Disable fast string operations.

Compatible FPU Code

This setting allows you to Enable or Disable the compatible FPU code.

7-10