SUPERSERVER
Power Button
The Power Button connection is located on pins 1 and 2 of JF2. Momentarily contacting both pins will power on/off the system. This button can also be configured to function as a suspend button (see the Power Button Mode setting in BIOS). To turn off the power when set to suspend mode, de- press the button for at least 4 seconds. Refer to the table on the right for pin definitions.
Power Button
Connector
Pin Definitions
(JF2)
Pin
Number Definition
1PW _O N
2Ground
Universal Serial Bus (USB0/1)
Two Universal Serial Bus ports are located beside the PS/2 key- board/mouse ports. USB0 is the bottom connector and USB1 is the top connector. See the table on the right for pin definitions.
Extra Universal Serial Bus Headers (FPUSB0/1)
The Front Panel USB0/USB1 head- ers are located at JD2. These are separate from the ports on the I/O panel. You will need a USB cable (not included) to use either con- nection. Refer to the table on the right for pin definitions.
Universal Serial Bus Pin Definitions
| USB0 |
| USB1 | |
Pin |
| Pin |
|
|
Number | Definition | Number | Definition | |
1 | +5V | 1 |
| +5V |
2 | P0- | 2 |
| P0- |
3 | P0+ | 3 |
| P0+ |
4 | Ground | 4 |
| Ground |
5 | N/A | 5 |
| Key |
|
|
|
|
|
Front Panel Universal Serial Bus Pin
FPUSB0 Definitions FPUSB1
Pin |
| Pin |
|
Number | Definition | Number | Definition |
1 | +5V | 1 | +5V |
2 | P0- | 2 | P0- |
3 | P0+ | 3 | P0+ |
4 | Ground | 4 | Ground |
5 | N/A | 5 | Key |
|
|
|
|
