SUPER MICRO Computer 6012P-6 Onboard Indicators, Thermal Fan Enable/Disable, LAN1/LAN2 LEDs

SUPERSERVER 6012P-6 User’s Manual

Thermal Fan Enable/Disable

JP38 allows you to enable or disable the thermal fan. When enabled, the fan will operate continuously. When disabled, it will operate only when a predefined temperature threshold has been exceeded. See the table on the right for jumper settings.

PCI-X Bus Speed Settings

Jumpers JP10 through JP15 are used to set the speed for the PCI-X buses. See the tables on the right for the jumper settings to select the speed for each slot.

Speaker Enable/Disable

On the JD1 header, add a jumper to pins 6-7 to enable the onboard speaker. If you wish to use an external speaker, remove it to dis- able the onboard speaker.

Thermal Fan

Enable/Disable

Jumper Settings (JP38)

Jumper

Position Definition

Open Disabled

Closed Enabled

PC Slot 1 Bus Speed Settings

(JP13, JP14, JP15)

Mode		JP14	JP15		JP13
PCI-X 133 MHz		Off	Off		Off
PCI-X 100 MHz		Off	On		Off
PCI-X 66 MHz		Off	On	Pins 1-2
PCI 66 MHz		Off	On	Pins 2-3
	PCI Slot 2 Bus Speed Settings
	(JP10, JP11, JP12)
	Mode	JP10	JP11		JP12
	PCI-X 66 MHz	Off	On		Pins 1-2
	PCI 66 MHz	Off	On		Pins 2-3

5-10 Onboard Indicators

LAN1/LAN2 LEDs

The Ethernet ports (located beside the VGA port) have two LEDs. See the tables below for the func- tions associated with these LEDs. On the Gb LAN port, the yellow LED indicates activity while the other LED may be green, orange or off to indicate the speed of the connection. See the tables below for descriptions.

100 Mb LAN LED Indicators (LAN1)

LED

Color Definition

Green Connected

Yellow Active

1 Gb LAN Right LED Indicator (LAN2)*

LED
Color	Definition
Off	No Connection
Green	100 MHz
Orange	1 GHz

5-20