Chapter 5: Advanced Motherboard Setup
5-11 Floppy/Hard Disk Drive and SCSI Connections
Note the following when connecting the floppy and hard disk drive cables:
•The floppy disk drive cable has seven twisted wires.
•A red mark on a wire typically designates the location of pin 1.
•A single floppy disk drive ribbon cable has 34 wires and two connectors to provide for two floppy disk drives. The connector with twisted wires always connects to drive A, and the connector that does not have twisted wires always connects to drive B.
Floppy Connector
The floppy connector is located on JP7. See the table below for pin definitions.
Floppy Connector Pin Definitions (JP7)
Pin Number | Function | Pin Number | Function |
1 | GND | 2 | FDHDIN |
3 | GND | 4 | Reserved |
5 | Key | 6 | FDEDIN |
7 | GND | 8 | Index- |
9 | GND | 10 | Motor Enable |
11 | GND | 12 | Drive Select B- |
13 | GND | 14 | Drive Select A- |
15 | GND | 16 | Motor Enable |
17 | GND | 18 | DIR- |
19 | GND | 20 | STEP- |
21 | GND | 22 | W rite Data- |
23 | GND | 24 | W rite Gate- |
25 | GND | 26 | Track 00- |
27 | GND | 28 | W rite Protect- |
29 | GND | 30 | Read Data- |
31 | GND | 32 | Side 1 Select- |
33 | GND | 34 | Diskette |
