SUPER MICRO Computer SERIES3800, S120T Jumper Settings, Explanation of Jumpers, Cmos Clear

Chapter 5: Advanced Serverboard Setup

5-10 Jumper Settings

Explanation of Jumpers

To modify the operation of the serverboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the con- nector. Pin 1 is identified with a square solder pad on the printed circuit board. See the serverboard layout pages for jumper locations.

Note: On a two-pin jumper, "Closed" means the jumper is on both pins and "Open" means the jumper is either on only one pin or completely removed.

CMOS Clear

JBT1 is used to clear CMOS (which will also clear any passwords). Instead of pins, this jumper consists of contact pads to prevent accidentally clearing the contents of CMOS.

To clear CMOS,

1.First power down the system and unplug the power cord(s).

2.With the power disconnected, short the CMOS pads with a metal object such as a small screwdriver.

3.Remove the screwdriver (or shorting device).

4.Reconnect the power cord(s) and power on the system.

Note: Do not use the PW_ON connector to clear CMOS.

5-21