SUPER MICRO Computer SERIES3800, S120T specs

Appendix C: Intel HostRAID Setup Guidelines

Resetting to Non-RAID and Resetting a RAID HDD

Warning: Be cautious when you reset a RAID volume HDD to non- RAID or Resetting a RAID HDD. Resetting a RAID volume HDD or Resetting a RAID HDD will reformat the HDD and delete all internal RAID structure on the drive.

a. From the main menu, select item3-Reset Disks to Non- RAID, and press <Enter>. The following screen will appear:

b. Use the <Up Arrow>, <Down Arrow> keys to highlight the RAID set drive to reset and press <Space> to select.

c. Press <Enter> to reset the RAID set drive. A Warning message displays.

d. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Exiting the Intel Matrix Storage Manager Utility:

a. From the main menu, select item4-Exit, and press <Enter>. A warning message will appear.

b. Press "Y" to reset the drive, or type "N" to go back to the main menu.

C-9

Image 113

SUPER MICRO Computer SERIES3800, S120T user manual Resetting to Non-RAID and Resetting a RAID HDD

Contents

SERIES3800/S120T Manual Revision Release Date February 15 About This Manual Server InstallationManual Organization Introduction Advanced Serverboard Setup System SafetyAdvanced Chassis Setup Bios Preface Table of Contents System Interface Bios Overview Chapter Introduction Processors Memory Serverboard FeaturesOnboard SAS Serial ATA Server Chassis Features Cooling System Backplane Intel 5100 Chipset System Block Diagram Headquarters Contacting SupermicroEurope Asia-Paciﬁc Unpacking the System Chapter Server InstallationPreparing for Setup Server Precautions Choosing a Setup LocationRack Precautions Rack Mounting Considerations Ambient Operating Temperature Identifying the Sections of the Rack Rails Installing the System into a Rack Preparing to Install the Chassis Rails Installing the Chassis Rails Installing the Rails to the Chassis Installing the Rack Rails Installing the Server into a Rack Installing the Server into the Rack Accessing the Inside of the System Checking the Serverboard Setup Checking the Drives Checking the Drive Bay Setup Checking the Airﬂow Reset PowerChapter System Interface Control Panel Buttons Overheat/Fan Fail Control Panel LEDs Drive Carrier LEDs Power FailPage Electrical Safety Precautions Chapter System Safety General Safety Precautions ESD Precautions Installing the Onboard Battery Operating Precautions Chapter Advanced Serverboard Setup Connecting Cables Serverboard InstallationInstalling to the Chassis Unpacking Connecting the Control Panel Connecting Data CablesConnecting Power Cables I/O Ports Control Panel Header Pins Installation Procedure Installing the Processor and Heat Sink CPU Installation Gold dot Socket key Uninstalling the Heat Sink Installing the Heat Sink Installation Memory Support Installing MemoryInstalling Memory Modules Dimm Installation Adding PCI Cards Installing an Add-on Card X7DCA-3/X7DCA-i Layout Not drawn to scale Serverboard Details X7DCA-3/X7DCA-i Quick Reference Jumper Description Default SettingConnector Description Main ATX Power Supply Connector Connector DeﬁnitionsSecondary Power Connectors Processor Power Connector Overheat/Fan Fail LED OH Reset ConnectorPower Fail LED Fan Headers Power On LEDNMI Button Wake-On-LAN Chassis IntrusionWake-On-Ring LAN1/2 Ethernet Ports Overheat LED/Fan Fail JOH1 Power LED/SpeakerUniversal Serial Bus USB Sgpio Headers Backpanel Power SMB I2C Connector Power SMB I2C ConnectorSAS Power SMB I2C Connector ATX PS/2 Keyboard and PS/2 Mouse Ports Front Panel Audio Control CD Header Explanation of Jumpers Jumper SettingsCmos Clear To clear Cmos Watch Dog Enable/Disable LAN1/2 Enable/DisableI2C Bus to PCI-X/ Slots I2C Bus to PCI-Exp. Slots Onboard Power LED LE1 Onboard IndicatorsLAN1/2 LEDs SAS LEDs Parallel Printer Port Parallel, Floppy, IDE, and Sata Ports Sata Ports IDE Connector Floppy Drive Connector Chapter Advanced Chassis Setup Chassis Front View Power Fail PowerFront Control Panel NIC1 System Fans Installing a New FanFan Failure Replacing Chassis Cooling Fans Removing a Chassis Fan Mounting a SAS/SATA drive in a Drive Carrier Drive Bay InstallationInstalling/Removing SAS/SATA Drives Removing a SAS/SATA Drive Carrier SAS/SATA Backplane Removing the Empty Drive Bay Installing Components in the 5.25 Drive BaysAdding a DVD/CD-ROM Drive Adding an IDE or Floppy Drive Replacing the Power Supply Power SupplyPower Supply Failure Page How To Change the Conﬁguration Data System BiosStarting the Setup Utility Introduction Main Bios Setup Running SetupDefault settings are in bold text unless otherwise noted Press the Delete key to enter Setup Bios Date Main Bios Setup Menu Main Setup FeaturesSystem Time System Date Type Transfer Mode LBA Mode ControlUltra DMA Mode CHS Format Available for Primary/Master only Serial ATA Sata RAID Enable Native Mode OperationSata Ahci Available when Sata RAID is Disabled Serial ATA XBoot Features Advanced SetupQuickBoot Mode QuietBoot XMemory Cache Cache Base 512K-640K Cache Base 0-512KCache Extended Memory Discrete Mtrr Allocation Xpci Conﬁguration XAdvanced Chipset Control XAdvanced Processor Options Echo TPR Hardware Prefetcher Available when supported by the CPUIntel Eist Support Available when supported by the CPU XI/O Device Conﬁguration Xcpu Cache Control Parallel Port Xdmi Event LoggingDMA Channel Floppy Disk Controller XConsole Redirection XHardware Monitor Logic Clear System Event Logging Voltage MonitoringSystem Event Logging XSystem Event Log/System Event Log List Mode XRealtime Sensor Data User Password Is Supervisor Password IsSet Supervisor Password Security Password on Boot Set User Password Boot Priority Order/Excluded from Boot Orders Boot Exit Keyboard locked Unlock key switch Keyboard errorMonitor type does not match Cmos Run Setup System battery is dead Replace and run Setup System timer error System Cmos checksum bad Default conﬁguration usedReal time clock error Check date and time settings Allocation Error for device Fail-Safe Timer NMI FailedEntering Setup Eisa Cmos not writeable Press F1 to resume, F2 to Setup, F3 for previous PS/2 Mouse Boot Summary ScreenDevice IRQ conﬂict Nnnn kB Extended RAM Passed System Bios shadowed Press F2 to enter SetupVideo Bios shadowed PS/2 MousePage Post Code Description Recoverable Post ErrorsTerminal Post Errors Post Code Description Post Code Description Post Code Description Appendix B Bios Post Codes Page Serial ATA Sata Introduction to the Intel ICH9R Serial RAID SetupIntroduction to Serial ATA and Parallel ATA Intel Matrix Storage RAID Conﬁgurations Creating, Deleting and Resetting RAID Volumes Using the Intel ICH9R Sata RAID Utility Program Creating a RAID 0 Volume Creating a RAID 1 Volume Creating a RAID 10 RAID 1+ RAID Creating a RAID 5 Set Parity Deleting RAID Volume Exiting the Intel Matrix Storage Manager Utility Resetting to Non-RAID and Resetting a RAID HDD Installing Windows XP/2000/2003 for RAID Systems Bios Weight Regulatory Compliance