SUPER MICRO Computer SCF418IF-R1K62BP Installing Air Shrouds, Installing an Air Shroud

SCF418 Chassis Manual

5-12 Installing Air Shrouds

Air Shrouds

Air shrouds concentrate airflow to maximize fan efficiency. The SCF418 and SCF418L chassis require an air shroud in each node.

Installing an Air Shroud

1.Power down the system and remove the power cords from the rear of the power supplies as described in Section 5-2. Remove the node from the chassis as described in Section 5-4 and remove the cover from the node as described in Section 5-5.

2.Make sure that the motherboard and all components are properly installed in each node.

3.Place the air shroud over the motherboard, as illustrated below. The air shroud sits behind the system fans and goes over the top of the motherboard and its components.

4.Repeat the procedure for the remaining three nodes.

1

13

Figure 5-27: Installing the Air Shroud

(Your node may differ from those shown in this illustration)

5-26