SUPER MICRO Computer SCF418IL-R1K62BP user manual Rack Mounting Instructions, Adjusting the Rails

SCF418 Chassis Manual

6-5 Rack Mounting Instructions

This section provides information on installing the chassis into a rack unit with the rails provided. There are a variety of rack units on the market, which may mean that the assembly procedure will differ slightly from the instructions provided. You should also refer to the installation instructions that came with the rack unit you are using. NOTE: This rail will fit a rack between 28.5" and 33.5" deep. The SCF418 is not designed for installation into a Telco post-style rack unit.

Identifying the Sections of the Rack Rails

The chassis package includes two rail assemblies in the rack mounting kit. Each assembly consists of two sections: A front section that secures to the front post of the rack and a rear section that can be adjusted in length and secures to the rear post of the rack. These assemblies are specifically designed for the left and right side of the chassis.

Adjusting the Rails

Each rail assembly has an adjusting screw. loosening this screw allows you to adjust the length of the rail to fit a variety of rack sizes.

Rear

Section

Front Section

This Side Faces

Outward

Adjusting

Screw

Figure 6-1: Identifying the Outer Rail and Inner Rails

(Left Rail Assembly Shown)

6-4