SCF418 Chassis Manual
Removing and Installing External System Fans
Figure 5-30: Installing the External Fan
(Your node may differ slightly from the one shown in this illustration)
Removing a Rear Exhaust Fan
1.Determine which node contains the failed fan and power down the node with the operating system.
2.Remove the power cord from the rear of the node as described on page
3.Press the release tab on the bottom of the fan and pull it away from rear of the node.
Installing a Rear Exhaust Fan
1.Press the release tab on the bottom of the fan and insert it into the open fan bay.
2.Push the fan into the bay until it clicks into the locked position.
