SCF418 Chassis Manual
Figure 6-4: Installing into a Rack
Note: figures are for illustrative purposes only. Always install servers into racks from the bottom up.
Chassis Installation
Installing the Chassis into a Rack
1.Confirm that the rails are correctly installed on the rack.
2.Align the bottom of the chassis with the bottom of the rails.
3.Insert the chassis into the rails, keeping the pressure even on both sides, pushing the chassis into the rack until it clicks into the locked position.
4.Secure the chassis handles to the front of the rack.
Stability hazard. The rack stabilizing mechanism must be in place, or the rack must be bolted to the floor before you slide the unit out for servicing. Failure to stabilize the rack can cause the rack to tip over.
